Table of Contents
Advertisement
Mediant 2000 SIP User's Manual
Table 6-1: Basic, Logging, Web and RADIUS Parameters (continues on pages 90 to 97)
ini File Field Name
Web Parameter Name
ResetWebPassword
DisableWebConfig
HTTPport
Customizing the Web Appearance Parameters
For detailed information on customizing the Web Interface, refer to
UseProductName
UserProductName
UseWebLogo
WebLogoText
LogoWidth
LogoFileName
BkgImageFileName
RADIUS-Related Parameters
For detailed information on the supported RADIUS attributes, refer to Section
EnableRADIUS
[Enable RADIUS]
AAAIndications
[AAA Indications]
MaxRADIUSSessions
[Max. RADIUS Sessions]
SharedSecret
[Shared Secret]
RADIUSRetransmission
[RADIUS Max.
Retransmissions]
RadiusTO
RADIUSAuthServerIP
[RADIUS Authentication Server
IP Address]
Version 4.4
*
Allows resetting to default of Web password to:
Username: "Admin"
Password: "Admin"
0 = Enable changing parameters from Web (default)
1 = Operate Web Server in "read only" mode
HTTP port used for Web management (default = 80)
0 = Disabled (default).
1 = Enabled.
If enabled, the 'UserProductNane' text string is displayed instead of the default
product name.
Text string that replaces the product name.
The default is "Mediant 2000".
The string can be up to 29 characters.
0 = Logo image is used (default).
1 = Text string is used instead of a logo image.
If enabled, AudioCodes' default logo (or any other logo defined by the
'LogoFileName' parameter) is replaced with a text string defined by the
'WebLogoText' parameter.
Text string that replaces the logo image.
The string can be up to 15 characters.
Width (in pixels) of the logo image.
Note: The optimal setting depends on the resolution settings.
The default value is 441, which is the width of AudioCodes' displayed logo.
Name of the image file containing the user's logo.
File name can be up to 47 characters.
The logo file name can be used to replace AudioCodes' default Web logo with a User
defined logo.
Use a gif, jpeg or jpg image file.
Name of the file containing the user's background image.
File name can be up to 47 characters.
The background file can be used to replace AudioCodes' default background image
with a User defined background.
Use a gif, jpeg or jpg image file.
0 = RADIUS application is disabled (default).
1 = RADIUS application is enabled.
0 = No indications (default).
3 = Accounting only
Number of concurrent calls that can communicate with the RADIUS server (optional).
The valid range is 0 to 240.
The default value is 240.
"Secret" used to authenticate the gateway to the RADIUS server. It should be a
cryptographically strong password.
Number of retransmission retries.
The valid range is 1 to 10.
The default value is 3.
The interval between each retry (measured in seconds).
The valid range is 1 to 30.
The default value is 10.
IP address of Authentication and Authorization server.
6. ini File Configuration of the Mediant 2000
Valid Range and Description
Appendix F
on page 207.
K.7
on page 251.
95
July 2005
Advertisement
Table of Contents
