Nortel Mediant TP-1610 SIP User Manual page 110

Table 6-3: SIP Configuration Parameters (continues on pages 100 to 110)
ini File Field Name
Web Parameter Name
IPProfile_ID
[IP Profile Settings]
TelProfile_ID
[Tel Profile Settings]
Mediant 2000 SIP User's Manual
*
IPProfile_<Profile ID> =
<Profile Name>,<Preference>,<Coder Group ID>,<IsFaxUsed *>,<DJBufMinDelay *>,
<DJBufOptFactor *>,<IPDiffServ *>,<ControlIPDiffServ
*>,<EnableSilenceCompression>, <RTPRedundancyDepth>
Preference = (1-10) The preference option is used to determine the priority of the
Profile. If both IP and Tel profiles apply to the same call, the coders and other common
parameters of the preferred Profile are applied to that call. If the Preference of the Tel
and IP Profiles is identical, the Tel Profile parameters are applied.
For example:
IPProfile_1 = name1,2,1,0,10,13,15,44,1,1
IPProfile_2 = name2,$$,$$,$$,$,$$,$$,$$,$$,1
$$ = Not configured, the default value of the parameter is used.
(*) = Common parameter used in both IP and Tel profiles.
Note 1: The IP ProfileID can be used in the Tel2IP and IP2Tel routing tables (Prefix and
PSTNPrefix parameters).
Note 2: 'Profile Name' assigned to a ProfileID, enabling User's to
and easily.
Note 3: This parameter can appear up to 4 times.
TelProfile_<Profile ID> =
<Profile Name>,<Preference>,<Coder Group ID>,<IsFaxUsed *>,<DJBufMinDelay *>,
<DJBufOptFactor *>,<IPDiffServ *>,<ControlIPDiffServ*>,<DtmfVolume>,<InputGain>,
<VoiceVolume>, <EnableDigitDelivery>, <ECE>
Preference = (1-10) The preference option is used to determine the priority of the
Profile. If both IP and Tel profiles apply to the same call, the coders and other common
parameters of the preferred Profile are applied to that call. If the Preference of the Tel
and IP Profiles is identical, the Tel Profile parameters are applied.
For examples:
TelProfile_1 = FaxProfile,1,2,0,10,5,22,33,2,22,34,1,1
TelProfile_2 = ModemProfile,0,10,13,$$,$$,$$,$$,$$,0,$$,0,1
$$ = Not configured, the default value of the parameter is used.
(*) = Common parameter used in both IP and Tel profiles.
Note 1: The Tel ProfileID can be used in the Trunk Group table (TrunkGroup_x
parameter).
Note 2: 'Profile Name' assigned to a ProfileID, enabling User's to
and easily.
Note 3: This parameter can appear up to 4 times.
Valid Range and Description
110
Mediant 2000 SIP
identify it intuitively
identify it intuitively
Document #: LTRT-72504