Mediant 2000 SIP User's Manual
Figure 2-2: Front and Upper View of the TP-1610 cPCI Board
1
5
Table 2-3: Front and Upper View of the TP-1610 cPCI Board Component Descriptions
Item #
Label
1
2
ETH
3
4
5
6
T1 / E1 STATUS
7
T1 / E1 STATUS
2.3.1
Board Hot-Swap Support
The TP-1610 cPCI board is hot-swappable and can therefore be removed from a slot (and
inserted into a slot) while the Mediant 2000 is under power. It is recommended though that you
power down the chassis and read the notes below before replacing the components.
For details on removing/inserting the optional CPU board, refer to the directions accompanying it.
Electronic components on printed circuit boards are extremely sensitive to static
electricity. Normal amounts of static electricity generated by clothing can damage
electronic equipment. To reduce the risk of damage due to electrostatic discharge when
installing or servicing electronic equipment, it is recommended that anti-static earthing
straps and mats be used.
Version 4.4
2
6
Status LEDs
Ethernet LEDs
Reset button
cPCI LEDs
cPCI Latch
T1/E1 Trunk Status LEDs (for each of trunks 1 to 8)
T1/E1 Trunk Status LEDs (for each of trunks 9 to 16)
Electrical Component Sensitivity
21
2. Mediant 2000 Physical Description
3
7
Component Description
4
July 2005