Displaying The Fax/Scan Mode Screen - Oce CM5520 User Manual

Scanning
2.2

Displaying the Fax/Scan mode screen

First display the Fax/Scan mode screen in order to perform scan operations.
When the machine is ready to begin making copies after being turned on, the
Basic screen appears.
Press the [Fax/Scan] key to display the Fax/Scan mode screen.
To activate a function or to select a setting, lightly touch the desired button
in the touch panel.
1
No. Part Name
1 Sub display area
2 Message display
3 Number of destinations
4 [Enter New Address] button
cm5520
2
9 8
Description
Touch [Job List] to display a screen showing the jobs cur-
rently being performed or waiting to be performed. Touch
[Mode Check] to check and change the destination set-
tings.
In addition, the amount of toner remaining can be
checked.
The status of the machine and details on operations that
must be performed are displayed here.
The number of specified destinations are indicated.
Touch this button to enter a destination when performing
Scan to E-Mail, Scan to FTP or Scan to SMB operations or
to select a user box where a job is to be stored. This but-
ton does not appear if "Manual Destination Input" (dis-
played by touching [Security Settings] on the
Administrator Settings screen, then [Security Details]) is
set to "Restrict".
3
4
5
6
7
2
2-5