Table of Contents
Advertisement
Confidential
Module Disassembly
When performing the module disassembly, the modules are disassembled into the following
parts. When you want to disassemble a corresponding item only, see the page and the step
numbers in brackets after part names.
Paper roll supply module
Cover, circuit board B (p. 6-30: step 5 to 6)
Plapoint (p. 6-30: step 5)
Crescent ring (p. 6-38: step 2 to p. 6-41: step 9)
Paper roll hold unit (p. 6-38: step 1)
Spacer, paper roll holder (p. 6-38: step 2)
Hexagonal nut (p.6-38 to p. 6-39: step 3)
Paper roll tension unit (*1) (p. 6-38: step 2 to p. 6-42: step 12)
Screw, paper NE detector (p. 6-38: step 2 to p. 6-42: step 12 to 13)
Paper NE harness assembly (*2) (p. 6-38: step 2 to p. 6-42: step 12to 15)
Photo interrupter (*3) (p. 6-38: step 2 to p. 6-42: step 12 to 16)
C.B. (M3 × 6) (p. 6-38: step 1)
Wire band
Cut Sheet Presenter Module
Spring, cut sheet presenter (p. 6-43: step 1)
Recover feeding A assembly (p. 6-43)
Cable, presenter module (*4) (p. 6-43 to 44)
Presenter module circuit board assembly (p. 6-43 to p. 6-45: step 9)
Spring, cut sheet presenter frame (p. 6-43 to 45)
Upper frame, cut sheet presenter unit (*5) (p. 6-43 to p. 6-46: step 13)
Gear, idler (p. 6-43 to 46)
Lower frame unit (*6) (p. 6-43 to 46)
Wire band
C.B (M3 × 4)
R.E (4)
6-28 Assembly and Disassembly
(p. 6-38 to 46)
Rev. A
Advertisement
Table of Contents
