Epson EU-T532 Technical Manual page 66

Confidential
Pre-assembly B
Reassembly
Part name
step
1 Frame, platen
2 Lock lever assembly
C.B.B-tite (M2 × × × × 6)
3
Cover, fixed blade
4 Fixed blade, H
5
Spring, fixed blade
Shouldec (2 × × × × 6 × × × × 2)
Rev. A
Frame, platen, straight unit
Install the lock lever assembly on the frame, platen, and secure it with a
× 1
screw.
C.B.B-tite (M2 × 6)
lock lever assembly
<Check>
Tightening torque: 294 to 343 mN•m {3.0 to 3.5 kg•cm}
Make sure that the screw does not skew during tightening.
Install the cover, fixed blade and the fixed blade, H on the frame, platen;
then secure them with shouldecs.
At this time, install the spring, fixed blade on one of the shouldecs, as
× 2
shown below.
spring, fixed blade
cover, fixed blade, H
frame, platen
<Check>
Tightening torque: 147 to 196 mN•m {1.5 to 2.0 kg•cm}
Make sure to install the fixed blade, H right-side-up.
Make sure that the dowels on the frame, platen fit securely into the holes
on the cover, fixed blade.
Make sure to install the spring, fixed blade in the correct position.
EU-T532/T542 Technical Manual
Assembly procedure
frame, platen
shouldecs
Assembly and Disassembly 6-3
fixed blade
mounting dowels