Small Parts Abbreviation; Assembly - Epson EU-T532 Technical Manual

Table of Contents

Advertisement

Confidential
Chapter 6
Assembly and Disassembly

Small Parts Abbreviation

All small parts are represented by the abbreviations listed below.
Table 6-1 Small Parts Abbreviations
Abbreviation
R.E
C-ring
C.B. (M2 × 2.5)
C.B. (M2.3 × 3)
C.B. (M2.5 × 4)
C.B. (M3 × 4)
C.B. (M3 × 6)
C.P. (M1.6 × 5)
C.P (P2)
C.B.B-tite (M2 × 6)
C.B.S-tite (M2.5 × 4)
C.B.S-tite (M3 × 5)
C.C.P-tite (M2.5 × 6)
C. P-tite. F screw (M2 × 3)

Assembly

Only assembly steps for the printer module are in this section. For assembly steps for other
modules, follow the disassembly procedures in "Disassembly" in reverse sequence. Also,
see <Reassembly Point> in "Disassembly procedure" while assembling.
Perform assembly while referring to the component shapes and mounting positions shown
in the exploded diagrams at the end of this manual.
The
symbols in the "Reassembly step" indicate places where checks are required. Make
sure to follow the instructions given in these places.
Circled numbers in the "Reassembly step" indicate that lubrication is required during the
reassembly of that component and that such lubrication will be difficult unless performed
during reassembly.
Refer to "Lubrication" in Chapter 4 for lubrication details on the printer module and other
modules. Also, see the lubrication diagrams at the end of this manual for the places to
lubricate.
Rev. A
Retaining ring E-type
Crescent ring
Cross-recessed binding head screw, 2 × 2.5, F/Zn
Cross-recessed binding head screw, 2.3 × 3, F/Zn
Cross-recessed binding head screw, 2.5 × 4, F/Zn
Cross-recessed binding head screw, 3 × 4, F/Zn
Cross-recessed binding head screw, 3 × 6, F/Zn
Cross-recessed pan head screw, 1.6 × 5, F/Zn
Cross-recessed pan head (S-P1) screw, 3 × 6, F/Zn
Cross-resessed binding head B-tite self tapping screw, 2 × 6, F/Zn
Cross-recessed binding head S-tite self tapping screw, 2.5 × 4, F/Zn
Cross-recessed binding head S-tite, 3 × 5, F/Zn
Cross-resessed cup head P-tite self tapping screw, 2.5 × 6, F/Zn
Cross-recessed P-tite self tapping flat end screw, 2 × 3, F/Ni
EU-T532/T542 Technical Manual
Part name
Assembly and Disassembly 6-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eu-t542

Table of Contents