Epson EU-T532 Technical Manual page 98

Confidential
Disassembly
step Disassembly part name
5 Plate, lower paper
guide
C.B.(M3 × × × × 4)
6 Printer module
C.B.(M3 × × × × 4)
lower rectangle hole
Rev. A
Remove two C.B.(M3 × × × × 4)s; then remove the plate, lower paper guide from
× 1
the plate, paper guide holder.
× 2
<Reassembly Point>
With the plate, lower paper guide tab section inserted in the paper guide of
the printer module, secure the plate, lower paper guide pushed against the
holding plate, printer with screws.
Tightening torque: 539 to 637 mN•m {5.5 to 6.5 kg•cm}
× 1 Remove four C.B.(M3 × × × × 4)s, and remove the printer module from the holding
× 4
plate, printer.
<Reassembly Point>
When you remove the printer module only, attach the plate, lower paper
guide again. (See <Reassembly Point> of the plate, lower paper guide for
attaching.)
Pass the narrower FFC cable through the lower rectangle hole on the holding
plate, printer. Fold the other cable (the wider one) so that it faces the
control circuit board side without passing it through the holding plate,
printer.
plate, paper guide holder
EU-T532/T542 Technical Manual
Disassembly procedure
5
printer module
Assembly and Disassembly 6-35
plate, lower paper guide
holding plate, printer
6