Table of Contents
Advertisement
Confidential
Disassembly
Disassembly part
step
name
6
7
8
6-40 Assembly and Disassembly
Insert a hexagonal screwdriver from the hole on the paper roll tension unit
with the paper roll tension unit fixed with your hand.
Loosen the hexagon socket set screw with the hexagonal screwdriver and
draw it to the paper roll tension unit side; loosen until it is completely drawn
from the edge of the frame, main.
<Check>
Do not draw the hexagon socket set screw more than 3 mm from the edge of
the paper roll tension unit.
Do not remove your hand from the paper roll tension unit until the hexagon
socket set screw is drawn from the edge of the frame, main.
Be sure not to remove two springs of the paper roll tension unit from the
hexagon socket set screw.
<Reassembly Point>
1. Secure the hexagon socket set screw at the position where it extends
6 ± 0.5 mm {0.236 ± 0.02"} from the frame, main with the hexagonal nut.
2. Be sure the hexagon socket set screw is in the correct position on the frame,
main.
After drawing the hexagon socket set screw completely from the frame,
main, remove the hexagonal screwdriver and your hand that was holding
the paper roll tension unit.
spring
paper roll tension unit
Disassembly procedure
hexagon socket set screw
frame, main
Rev. A
Advertisement
Table of Contents
