Table of Contents
Advertisement
Confidential
The tip of the paper sent from the printer module is in the standby state between the first roller,
cut sheet presenter and the roller, cut sheet hold, and the paper is continuously fed from the
printer module. The paper pushes up the paper guide, upper and temporarily forms a loop.
cut sheet
paper guide, upper
autocutter
roller, cut sheet hold (first)
roller, cut sheet presenter (first)
Figure 2-23 Cut Sheet with Loop
When the paper feed from the printer module is finished, the motor, paper feed receipt, B
resumes rotating. At this time, the cutter on the printer module cuts the paper. The cut sheet is
passed from the first roller, cut sheet presenter to the second roller, cut sheet presenter,
and is carried to the paper exit.
When the carried paper sensor detects the end of the cut sheet, the motor, paper feed
receipt, B will stop. With the cut sheet between the second roller, cut sheet presenter and the
second roller, cut sheet hold, a series of operations is completed and the cut sheet is ejected
from the paper exit.
A cut sheet presence sensor is provided near the paper exit to detect whether or not the cut
paper is removed by a recipient.
roller, cut sheet hold (first)
carried paper sensor
autocutter
roller, cut sheet hold (second)
cut sheet presence sensor
cut sheet
paper exit
roller, cut sheet presenter (second)
roller, cut sheet presenter (first)
Figure 2-24 End of the Cut Sheet Carrying Operation
2-16 Operation Principles
Rev. A
Advertisement
Table of Contents
