Confidential
Control Circuit Board Module
The control circuit board module controls all functions of each module and has the interface
connectors and the power supply terminals. Each function can be set by using the DIP switches
and the memory switches.
Figure 2-27 Appearance of the control circuit board module
DIP Switches
The circuit board has two DIP switches (DSW 1/2). Each setting is as follows:
DIP Switch 1
Table 2-1 DSW 1
SW No.
Function
1
Black mark sensor
2
Interface selection
3
4
Serial interface
handshaking
5
Serial interface
parity check
6
Serial interface
parity selection
7
Serial interface
baud rate selection
8
*: Effective only when the serial interface is selected.
Rev. A
ON
Enabled
Disabled
Refer to Table 2-2
XON/XOFF
DTR/DSR or
CTS/RTS
Yes
No
Even
Odd
Refer to Table 2-3
EU-T532/T542 Technical Manual
DIP switch 1
DIP switch 2
OFF
Default Setting
OFF
OFF*
Operation Principles 2-19