Epson EU-T532 Technical Manual page 94

Confidential
Disassembly
step Disassembly part name
8 Control circuit board
module
C.B.(3 × × × × 4)
Cover, circuit board A × 1
9
C.B.(3 × × × × 4)
10 Plate, cable hold
C.B.(3 × × × × 3)
seal, paper exit guide
Rev. A
Remove four C.B.(3 × × × × 4)s; then remove the control circuit board module.
× 1
× 4
<Check>
Use a proper body grounding procedure before handling the control
circuit board module.
Do not deform the parallel connector on the control circuit board
module by getting caught it on the cover.
Remove six C.B.(3 × × × × 4)s: then remove the cover, circuit board A from the
× 6
paper roll supply module.
× 1 Remove two C.B.(3 × × × × 3)s; then remove the plate, cable hold.
× 2
plate, paper hold
EU-T532/T542 Technical Manual
Disassembly procedure
5
8
10
cover, circuit board A
control circuit board module
9
9
Assembly and Disassembly 6-31