Epson EU-T532 Technical Manual page 85

Confidential
Main Assembly F
Reassembly
Part name
step
1 Fixing plate
C.B.S-tite (M3 × × × × 5)
2 Gear, reduction
3 Gear, idler
R.E. (2.5)
6-22 Assembly and Disassembly
Installation of the Fixing plate, the Gear, reduction and
the Gear, idler
Install the fixing plate to the frame assembly, and secure it with the screw
× 1
while pushing the edge of the fixing plate to the bearing, platen.
bearing, platen
fixing plate
C.B.S-tite (M3 × 5)
<Check>
Tightening torque: 686 to 882 mN•m {7 to 9 kg•cm}
Make sure that the edge of the fixing plate is pushed securely to the
bearing, platen.
Install the gear, reduction and the gear, idler to the shafts on the frame
× 2
assembly, and secure them with R.E.s.
R.E. (2.5)
gear, idler
<Check>
Make sure not to deform the shaft on the frame assembly when securing
with the R.E.
Assembly procedure
frame assembly
gear, reduction
frame assembly
shafts
Rev. A