Epson EU-T532 Technical Manual page 80

Confidential
Main Assembly C
Reassembly
Part name
step
3 Frame, platen, straight unit
4 Shaft, frame, platen
R.E. (1.5)
5 Lever, platen
6 Spring, lever, platen
Rev. A
Installation of the Frame, platen, straight unit
Lubricate the dowel on the frame assembly with G-36.
Lubricate the point where the frame assembly contacts with the lock
lever assembly with G-15.
Install the frame, platen, straight unit to the frame assembly.
G-15
point where the frame
assembly contacts with
the lock lever assembly
frame assembly
Align the holes on the frame assembly and the frame, platen, straight unit,
× 1
and insert the shaft, frame, platen into these holes; then, secure it with an
R.E..
shaft, frame, platen
Install the spring, lever, platen on the lever, platen, as shown below.
lever, platen
EU-T532/T542 Technical Manual
Assembly procedure
G-15
shorter edge
Assembly and Disassembly 6-17
frame, platen,
straight unit
G-36
dowel
R.E (1.5)
longer edge
spring, lever, platen