Confidential
Note:
For the parts marked with (*1) to (*6), new wire bands are required when assembly, since the
following wire bands used for those parts will be cut during disassembly. See the disassembly steps for
the position of the wire bands.
(*1): Wire band (SKB-85) × 1
(*2): Wire band (SKB-85) × 1
(*3): Wire band (SKB-85) × 1
(*4): Wire band (SK-1.5M) × 1
(*5): Wire band (SKB-85) × 2
(*6): Wire band (SKB-85) × 2 and wire band (SKB-1.5M) × 1
The wire bands given below are the identical ones.
•
(*2) and (*3) wire bands (SKB-85)
•
(*4) and (*6) wire bands (SKB-1.5M)
•
(*5) and (*6) wire bands (SKB-85)
When you replace the cut sheet presenter module, the paper exit, and the upper frame
cut sheet presenter unit, a seal, paper exit guide is required for each part.
Rev. A
EU-T532/T542 Technical Manual
Assembly and Disassembly 6-29