Paper Carrying Operation (Without Loop); Retract Function - Epson EU-T532 Technical Manual

Confidential

Paper Carrying Operation (Without Loop)

The cut sheet can be carried without forming a loop.
Note:
During paper carrying operations without a loop, do not pull out the paper.

Retract Function

The retract function retracts the cut sheet inside the unit if the recipient does not take the cut
sheet. The retract mechanism consists of the frame, paper route change, the plate, route
change guide, the roller, retract, the solenoid, and the paper path change sensor.
The retracting operation is started by a command signal for the retraction. At first, the paper
route change performs the paper path change operation to retract the cut sheet. When the
solenoid linked with the frame, paper route change is energized, the frame, paper route
change and the plate, route change guide move in direction A. After the paper route
change sensor detects the end of the paper route change operation, the motor, paper feed
receipt, B begins to rotate in the counterclockwise direction; then through the gears, the roller,
cut sheet presenter and the roller, retract inside the retracting paper route rotate and the cut
sheet is retracted into the unit through the retracting paper route. The retracted cut sheet will fall
to the bottom of the cut sheet presenter module.
Rev. A
Figure 2-25 Cut Sheet Operation without Loop
EU-T532/T542 Technical Manual
cut sheet
roller, cut sheet hold
roller, cut sheet presenter
Operation Principles 2-17