Table of Contents
Advertisement
Confidential
Disassembly
step
Disassembly part name
7
Plate, paper guide
holder
C.B.(M3 × × × × 4)
8
Holding plate, printer
C.B.(M3 × × × × 4)
C.B.(M3 × × × × 6)
Disassembly step: 7
Reassembly step:
Disassembly step: 7
Reassembly step:
6-36 Assembly and Disassembly
Remove two C.B.(M3 × × × × 4)s securing the plate, paper guide holder and the
× 1
paper roll supply module, and remove two C.B.(M3 × × × × 4)s securing the plate,
× 4
paper guide holder and the holding plate, printer; then remove the plate,
paper guide holder.
<Reassembly Point>
1 Secure the plate, paper guide holder to the holding plate, printer while
pushing it to the frame, main of the paper roll supply module.
2 Secure the plate, paper guide holder to the frame, main of the paper roll
supply module. At this time, make sure that there is no space between the
plate, paper guide holder and the frame, main.
Tightening torque: 539 to 637 mN•m {5.5 to 6.5 kg•cm}
Remove four C.B.(M3 × × × × 4)s and two C.B.(M3 × × × × 6)s to remove the holding
× 1
plate, printer from the paper roll supply module.
× 4
× 2
<Reassembly Point>
1. Attach the holding plate, printer to the paper roll supply module, and secure
a screw temporarily. (step
2. Secure each screw to the respective mounting positions in sequence of
reassembly steps
Tightening torque: 539 to 637 mN•m {5.5 to 6.5 kg•cm}
<Reassembly Check>
Be sure to note the size of screws.
(M3 × 4))
frame, main
plate, paper
guide holder
Disassembly procedure
below)
to
below.
: C.B. (M3 × 6), other screws: C.B.
and
Disassembly step: 7
Reassembly step:
Disassembly step: 7
Reassembly step:
6
holding plate, printer
6
Disassembly step: 7
Reassembly step:
Disassembly step: 7
Reassembly step:
tighten temporarily
tighten securely
Rev. A
Advertisement
Table of Contents
