Epson EU-T532 Technical Manual page 25

Confidential
Note:
If the movable cutter blade, full, H can not be returned to the home position because of a foreign
matter locking the blade when powered by the motor, rotate the knob on the gear, cutter worm, H
with a tool such as a ball-point pen or tweezers to move the movable cutter blade, full, H to the home
position. The window on the cover, cutter, H can be used to check if the movable cutter blade,
full, H has returned to the home position.
window
knob
<Movable cutter blade in the home position>
Figure 2-20 Home position check
2-14 Operation Principles Rev. A