Epson EU-T532 Technical Manual page 108

Confidential
Disassembly
step Disassembly part name
Wire band (SKB-85) × 2
8
C.B.(3 × × × × 4)
9
Presenter module
circuit board assembly
10
R.E(4)
11
12 Spring, cut sheet
presenter module
Fulcrum shaft, cut sheet
presenter
(R.E(4)
Rev. A
Cut two wire bands below binding the lead wires.
× 2 Remove two C.B.(3 × × × × 4)s to remove the presenter module circuit board
assembly from the lower frame unit.
× 1
× 2
Remove two R.E (4)s (inside and outside of the frame) on the gear side of the
fulcrum shaft, cut sheet presenter frame securing the upper frame, cut sheet
presenter unit and the lower frame unit.
Move the spring, cut sheet presenter frame to the groove of the frame, and
unhook the one side of the spring.
Pull out the fulcrum shaft, cut sheet presenter from the frame, and remove
× 1
the spring, cut sheet presenter frame from between the upper frame, cut
sheet presenter unit and the lower frame unit.
× 1
× 1)
10
EU-T532/T542 Technical Manual
Disassembly procedure
9
8
upper frame cut sheet presenter unit
11、12
spring, cut sheet presenter frame
Assembly and Disassembly 6-45
presenter module
circuit board
assembly
12
lower frame unit
10