Epson EU-T532 Technical Manual page 88

Confidential
Assembly I Arranging the lead wires
Reassembly
Part name
step
1
2
3 Sheet, board
Rev. A
Insert the lead wire connectors to the connectors on the circuit board.
variable resistor
connector for the paper
detector assembly
<Check>
Make sure that the connectors are oriented properly when connecting.
Make sure that the connectors are inserted securely.
All lead wires should be passed through the hook on the frame assembly,
and arranged inside of the printer.
hook
<Check>
Make sure that any of the lead wires are not caught by the projections
(the colored part).
Make sure not to damage the coats of the lead wires when arranging the
lead wires.
× 1
Paste the double-sided tape on the sheet, board to the circuit board.
sheet, board
EU-T532/T542 Technical Manual
Assembly procedure
connector for the platen detector assembly
connector for the
motor, paper feed,
receipt, B
connector for the
lead wire, paper
cutter
connector for the optional B.M. detector
Assembly and Disassembly 6-25
projections