Epson EU-T532 Technical Manual page 83

Confidential
Main Assembly E
Reassembly
Part name
step
1 Plate, pressure spring
2 Circuit board assembly
C.B.S-tite (M2.5 × × × × 4)
3 Spring, press head
4
6-20 Assembly and Disassembly
Installation of the Plate, pressure spring
Install the circuit board to the plate, pressure spring, and secure it with
× 1
screws.
C.B.S-tite (M2.5 × 4)
circuit board
assembly
<Check>
Tightening torque: 588 to 637 mN•m {6 to 6.5 kg•cm}
× 2
Install the spring, press head to the plate, pressure spring.
<Check>
Make sure that the spring, press head is pushed securely into the plate,
pressure spring.
Hook the edge of the spring, press head to the groove of the thermal print
head assembly while pushing the plate, pressure spring in the arrow
direction; then hook it to the groove of the frame assembly.
groove of the
frame assembly
Assembly procedure
plate, pressure spring
plate, pressure spring
groove of the thermal
print head assembly
spring, press head
groove of the frame
assembly
spring, press head
Rev. A