Confidential
Chapter 3
Handling
Precautions
Transport Precautions
When shipping the printer, use anti-static packing materials.
Remove a paper roll when transporting the EU-T532/T542.
Make sure to close the paper roll hold unit of the paper roll supply module, the platen unit
of the printer module, and the main unit and the upper frame, cut sheet presenter unit of
the cut sheet presenter module when transporting.
Carrying Precautions
Hold the frame, main and the holding the plate, printer of the paper roll supply module
when carrying.
Note:
Do not hold parts other than above such as the holder, paper roll (or shaft, paper roll) or the
roller, paper roll tension; otherwise the functions may be affected because of damage or
deformation of parts.
When you put this unit on a place such as a desk, be sure to put it on a flat place; otherwise,
the unit may fall down or a malfunction may occur because of deformation of parts.
holder, paper roll
(Inside: shaft, paper roll)
hole for ground wire
Rev. A
frame, main
roller, paper roll tension
Figure 3-1 Correct way of holding the EU-T532/T542
EU-T532/T542 Technical Manual
holding plate, printer
Handling 3-1