Epson EU-T532 Technical Manual page 75

Confidential
Pre-assembly F
Reassembly
Part name
step
1 Black mark (B.M.) sub-
assembly
2 Paper guide
C.P-tite F screw (M2 × × × × 3)
6-12 Assembly and Disassembly
Installation of Black mark detector sub-assembly (optional)
Install the B.M. detector sub-assembly in one of the two detector
mounting holes on the paper guide, and secure it with a screw. Both the
× 1
straight path and the curved path types can be installed this way.
B.M. detector sub-assembly
paper guide
<Check>
Tightening torque: 118 to 216 mN•m {1.2 to 2.2 kg•cm}
Make sure that the detector fits securely into the detector mounting hole
on the paper guide.
Assembly procedure
C.P-tite. F screw (M2 × 3)
mounting hole
Rev. A