Configuring the switch using EDM
Procedure
1. From the Device Physical View, click a switch.
2. From the navigation tree, click Edit.
3. In the Edit tree, click Unit.
Unit field descriptions
The following table describes the fields on the Unit tab.
Name
Type
Descr
Ver
SerNum
BaseNumPorts
TotalNumPorts
Configuring rate limiting using EDM
Use this procedure to display and configure rate limiting on a switch.
Procedure
1. From the Device Physical View, click a unit.
2. From the navigation tree, click Edit.
3. In the Edit tree, click Unit.
4. In the work area, select the Rate Limit tab.
5. To a rate limit, click a TrafficType row.
6. Double-click the cell in the AllowedRatePps column.
7. Type a value.
8. Double-click the cell in the Enable column.
98
Getting Started
Description
Specifies the type of switch.
Description of switch.
Specifies the hardware revision number of
the switch.
Specifies the serial number of the switch.
Specifies the base number of ports.
Specifies the total number of ports.
Comments? infodev@avaya.com
March 2013