Configuring The Terminal - Avaya 3500 series Getting Started

Configuring the terminal

You can configure the switch terminal settings to suit your preferences for the terminal speed
and display.
About this task
Use the following procedure to configure terminal settings including the terminal connection
speed, and terminal display width and length, in number of characters.
Procedure
1. Logon to the ACLI User EXEC mode.
2. At the command prompt, enter the following command:
3. To display the current serial port information, enter the following command:
Example
The following figure shows the output from the show terminal command.
Variable definitions
The following table describes the parameters for the terminal command.
speed {2400|4800|9600|19200|38400}
length <1–132>
Getting Started
terminal speed {2400|4800|9600|19200|38400} | length <1–132>
| width <1–132>
show terminal
Variable Value
Sets the transmit and receive baud rates for
the terminal. You can set the speed to one of
the five options shown.
DEFAULT: 9600
Sets the length of the terminal display in
characters.
RANGE: 1 to 132
Configuring the terminal
March 2013 27