Name
LastSyncSourceInetAddress
NextSyncTime
PrimaryServerSyncFailures
SecondaryServerSyncFailures
CurrentTime
Configuring local time zone using EDM
Use this procedure to configure the local time zone for the switch geographical location.
Procedure
1. In the navigation tree, click Edit.
2. In the Edit tree, click SNTP/Clock.
3. In the work area, click the Time Zone tab.
4. In the TimeZone box, select the time zone offset.
5. In the TimeZoneAcronym dialog box, type a time zone acronym.
6. On the toolbar, click Apply.
Getting Started
Configuring local time zone using EDM
Description
Indicates the IP address of the SNTP server
with which this device last synchronized.
This is a read-only value.
Indicates the UTC at which the next
synchronization is scheduled. This is a read-
only value.
Indicates the number of times the switch
failed to synchronize with the primary server
address. However, synchronization with the
secondary server address can still occur.
This is a read-only value.
Indicates the number of times the switch
failed to synchronize with the secondary
server address. This is a read-only value.
Indicates the current switch UTC. This is a
read-only value.
March 2013
109