Specifying Summer-Time Recurring Dates - Avaya 3500 series Getting Started

Configuring the switch using ACLI
Variable definitions
The following table describes the parameters for the clock summer-time command.
zone
date {<day> <month> <year> <hh:mm>}
{<day> <month> <year> <hh:mm>}
offset
no

Specifying summer-time recurring dates

Specify the dates that recur during the summer-time clock every year. This procedure provides
flexibility for countries where the Daylight Savings Time is different than North America.
Procedure
1. Log on to ACLI in Global Configuration command mode.
2. At the command prompt, enter the following command:
60 Getting Started
Variable
Comments? infodev@avaya.com
Value
Specifies the acronym to be displayed when
summer time is in effect. If unspecified,
defaults to the time zone acronym.
RANGE: up to 4 characters
The first date specifies when summer time
starts, and the second date specifies when
summer time ends.
• day — day of the month (RANGE: 1 to 31)
• month — month (RANGE: first three letters
by name)
• hh:mm — time in military format (24–hour
clock), in hours and minutes
Important:
<day> <month> parameters can also be
entered in order: <month> <day>.
Number of minutes to add during summer
time
RANGE: —840 to 840
Disables the daylight savings time feature
March 2013