Configuring the management IP address
Example
The following figure displays a sample output of the show ip command.
3524GT-PWR+(config)#show ip
Bootp/DHCP Mode: BootP Or Default IP
Switch IP Address:
Switch Subnet Mask:
Default Gateway:
3524GT-PWR+(config)#
Variable definitions
The following table describes the parameters for the show ip command.
bootp mode
default-gateway
address
switch
dns
Displaying IP address information
Use this procedure to display the IP configurations, switch address, subnet mask, and gateway
address.
Procedure
1. Log on to the ACLI User EXEC command mode.
2. At the command prompt, enter the following command:
32
Getting Started
If you do not enter any parameters, the show ip command displays all IP-related
configuration information.
Configured
-------------
172.16.120.10
255.255.255.0
172.16.120.1
Variable
Comments? infodev@avaya.com
In Use
Last BootP/DHCP
-------------
---------------
172.16.120.10
0.0.0.0
255.255.255.0
0.0.0.0
172.16.120.1
0.0.0.0
Value
Displays BootP-related IP information
Displays the IP address of the default
gateway
Displays the current IP address
Specifies the current IP address of the switch
Displays the DNS configuration
March 2013