Avaya 3500 series Getting Started page 105

Config Image Diag file tab field descriptions
The following table describes the fields on the Config/Image/Diag file tab.
Name
TftpServerInetAddressType
TftpServerInetAddress
BinaryConfigFileName
ImageFileName
FwFileName(Diagnostics)
Action
Getting Started
Changing switch software using EDM
Description
Specifies the type of TFTP address:
• IPv4
• IPv6
Specifies the IP address of the TFTP server
on which the new software images are stored
for download.
Specifies the binary configuration file
currently associated with the switch.
Specifies the name of the image file currently
associated with the switch. You can change
this value to the name of the software image
to be downloaded.
Specifies the name of the diagnostic file
currently associated with the switch. You can
change this field to the name of the
diagnostic software image to be
downloaded.
Specifies the actions taken during this file
system operation. The available options are:
• other
• dnldConfig: downloads a configuration
file to the switch. The new configuration file
is implemented on the next switch boot
cycle.
• upldConfig: uploads a configuration file to
a server from the switch. The configuration
file contains the current switch MIB object
value.
• dnldImg: downloads a new software
image to the switch.
• dnldImgIfNewer: downloads a new
software image to the switch only if it is
newer than the image currently in use.
• dnldImgNoReset: downloads a new
software image to the switch, but does not
March 2013 105