Chapter 14: Managing Power over Ethernet
Managing switch PoE using EDM
Use this procedure to display and manage Power over Ethernet (PoE) for a switch unit.
Procedure
1. From the Device Physical View, click a switch unit with PoE ports.
2. From the navigation tree, click Edit.
3. In the Edit tree, click Unit.
4. In the work area, click the PoE tab.
5. In the UsageThreshold%, type a value.
6. Perform one of the following:
7. In the PoweredDeviceDetectType section, click a radio button.
8. On the toolbar, click Apply.
Getting Started
(PoE) using EDM
• To enable the sending of traps if the switch power usage exceeds the
configured threshold percentage, select the NotificationControlEnable
check box.
OR
• To disable the sending of traps if the switch power usage exceeds the
configured threshold percentage, clear the NotificationControlEnable check
box.
March 2013
115