Avaya 3500 series Getting Started page 43

Example
The following figure provides a sample of the show running-config command with the
MLT value.
ERS-3524T# show running-config module mlt
! Embedded ASCII Configuration Generator Script
! Model = Ethernet Routing Switch 3524T
! Software version = v5.0.0.22
!
! Displaying only parameters different to default
!================================================
enable
configure terminal
!
! *** MLT (Phase 1) ***
!
no mlt
mlt 1 name "Trunk #1" enable member 11-14
mlt 1 bpdu single-port
mlt 1 loadbalance advance
mlt 2 name "Trunk #2" enable member 21-24
!
! *** MLT (Phase 2) ***
!
mlt spanning-tree 1 stp learning fast
mlt spanning-tree 2 stp learning disable
!
ERS-3524T#
Variable definitions
The following table describes the optional parameters for the show running-config
command.
verbose
module <value>
Getting Started
normal operation to ensure that other switch management tasks received
appropriate priority.
Variable
Displaying the current configuration
Value
Displays entire configuration, including
defaults and non-defaults.
Displays configuration of an application for
any of the following parameters: [802.1AB]
[adac] [arp-inspection] [banner] [core] [dhcp-
relay] [dhcp-snooping] [eap] [interface] [ip]
[ip-source-guard] [ipmgr] [ipv6] [l3] [l3-
protocols] [lacp] [logging] [mac-security] [mlt]
March 2013 43