1. Manuals
  2. Brands
  3. Avaya Manuals
  4. Switch
  5. ERS 3500 Series
  6. Manual

Avaya ERS 3500 Series Manual

Installing transceivers and optical components on ethernet routing switch
Hide thumbs Also See for ERS 3500 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Installing Transceivers and Optical
Components on Avaya Ethernet Routing
Switch 3500 Series
Release 5.3
NN47203-302
Issue 04.01
July 2015

Advertisement

Table of Contents
loading

Related Manuals for Avaya ERS 3500 Series

Summary of Contents for Avaya ERS 3500 Series

  • Page 1 Installing Transceivers and Optical Components on Avaya Ethernet Routing Switch 3500 Series Release 5.3 NN47203-302 Issue 04.01 July 2015...
  • Page 2 APPLICABLE TO ANYONE WHO DOWNLOADS, USES AND/OR written consent of Avaya can be a criminal, as well as a civil offense INSTALLS AVAYA SOFTWARE, PURCHASED FROM AVAYA INC., under the applicable law.
  • Page 3 Hosted Service notices and articles, or to report a problem with your Avaya product or Hosted Service. For a list of support telephone numbers and contact addresses, go to the Avaya Support website: http://support.avaya.com (or such successor site as designated by Avaya), scroll to the bottom of the page, and select Contact Avaya Support.

  • Page 4: Table Of Contents

    ....................  41 General SFP+ specifications ................... 41 Supported SFP+ transceivers Chapter 6: Translations of safety messages................ 49 ............ 49 Class A electromagnetic interference warning statement Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015 Comments on this document? infodev@avaya.com...
  • Page 5 Connector cleaning safety danger statement .................. 55 Optical fiber damage warning statement .............. 56 Optical fiber connector damage warning statement ..................... 57 SFP damage warning statement Glossary........................... 59 July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series Comments on this document? infodev@avaya.com...

  • Page 6: Chapter 1: Introduction

    For more information about new features of the switch and important information about the latest release, see Release Notes for Avaya Ethernet Routing Switch 3500 Series, NN47203-400. For more information about how to configure security, see Configuring Security on Avaya Ethernet Routing Switch 3500 Series, NN47203-504.

  • Page 7: Viewing Avaya Mentor Videos

    Avaya Mentor videos provide technical content on how to install, configure, and troubleshoot Avaya products. About this task Videos are available on the Avaya Support website, listed under the video document type, and on the Avaya-run channel on YouTube. Procedure •...

  • Page 8: Subscribing To E-Notifications

    3. Under My Information, select SSO login Profile. 4. Click E-NOTIFICATIONS. 5. In the GENERAL NOTIFICATIONS area, select the required documentation types, and then click UPDATE. Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015 Comments on this document? infodev@avaya.com...
  • Page 9 8. Scroll through the list, and then select the product name. 9. Select a release version. 10. Select the check box next to the required documentation types. July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series Comments on this document? infodev@avaya.com...

  • Page 10: Support

    Chat with live agents to get answers to questions, or request an agent to connect you to a support team if an issue requires additional expertise. Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015 Comments on this document? infodev@avaya.com...

  • Page 11: Chapter 2: New In This Release

    AA1419014–E5 1000BASE-SX AA1419015–E5 1000BASE-LX Note: Avaya strongly recommends using the newer DDI versions of these SFP transceivers. For more information, see Job aid for selecting an SFP on page 18. Other changes See the following sections for information about changes that are not feature-related.

  • Page 12: Chapter 3: Safety And Equipment Care Information

    Fiber optic cable care Although reinforcing material and plastic insulation protects the glass fiber in fiber optic cable, it is subject to damage. Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015 Comments on this document? infodev@avaya.com...

  • Page 13: Fiber Optic Connector Care

    The proper connector cleaning method depends on the connector contaminants: • Judge cleanliness by visual inspection with a fiber microscope. First inspect the connector, and then clean as required. July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series Comments on this document? infodev@avaya.com...

  • Page 14: Cleaning Single Connectors

    When you inspect a connector, ensure that light sources are off. The light source used in fiber optic cables can damage your eyes. Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015 Comments on this document? infodev@avaya.com...

  • Page 15: Cleaning Duplex Connectors

    Risk of eye injury When you inspect a connector, ensure that light sources are off. The light source in fiber optic cables can damage your eyes. July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series Comments on this document? infodev@avaya.com...

  • Page 16: Cleaning Receptacles

    Compressed air must be free of dust, water, and oil, or filmy deposits or scratches on the surface of the connector can result. Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015 Comments on this document? infodev@avaya.com...
  • Page 17 If you do not reinstall the connector, use a protective cap. If problems persist, ensure that the connector or receptacle is free from damage. July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series Comments on this document? infodev@avaya.com...

  • Page 18: Chapter 4: Sfp

    Not all SFP transceivers or products support DDM. Job aid The following table describes the reach provided by various SFP transceivers. This table is informational only—not all Avaya products support all the SFPs listed here. Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015...
  • Page 19 The ERS 3500 Series only checks warning and alarm status bits during initialization and during requests for dynamic data. If the system asserts or clears an alarm or warning, the system logs a...

  • Page 20: Installing An Sfp

    DDI shuts down the corresponding port if a high or low alarm occurs on the port. The following table lists and describes the Avaya SFP models the ERS 3500 Series supports. The SFPs that support DDI are indicated by (DDI) after the ROHS Product Number.
  • Page 21 The following figure shows an example installation of a bore plug transceiver with the bail latch facing up. The figure does not represent a specific product. July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series Comments on this document? infodev@avaya.com...

  • Page 22: Removing An Sfp

    Remove an SFP to replace it or to commission it elsewhere. Before you begin • Wear an antistatic wrist strap. Danger: Risk of eye injury by laser Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015 Comments on this document? infodev@avaya.com...

  • Page 23: Sfp Specifications

    (BER) of 10-12. SFP labels The Avaya label on a typical SFP transceiver contains an Avaya serial number, a bar code, a manufacturer code, an interface type, and a part number.

  • Page 24: General Sfp Specifications

    The 1000BASE-T SFP only operates at 1 gigabits per second (Gbps). ERS 3500 does not support 100 Mb or 10 Mb speeds. Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015 Comments on this document? infodev@avaya.com...
  • Page 25 The 1000BASE-SX SFP transceiver provides 1000BASE-SX gigabit Ethernet connectivity at 850 nm using multimode optical fiber. This SFP supports only full-duplex operation. The part number is AA1419013-E5*. July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series Comments on this document? infodev@avaya.com...
  • Page 26 The part number is AA1419014-E5*. * This transceiver has reached end-of-life (EOL). After the inventory depletes, you can no longer purchase this transceiver. Avaya recommends AA1419048–E6 as a replacement. You must use a jumper cable to adapt the LC connector to the MT–RJ connector.
  • Page 27 The part number is AA1419049-E6. Table 7: 1000BASE-LX DDI SFP specifications Parameter Specifications Maximum electrical power consumption 1.0 watt (W) Connectors Duplex LC Table continues… July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series Comments on this document? infodev@avaya.com...
  • Page 28 1 dB at 40 km Transmitter characteristics Launch power –4.0 to 1.0 dBm Receiver characteristics Receiver sensitivity –21 dBm Maximum receiver power –3.0 dBm Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015 Comments on this document? infodev@avaya.com...
  • Page 29 The following table describes the 1000BASE-XD DDI SFP transceiver. This SFP transceiver operates at 1550 nm and has a reach of up to 40 km. The part number is AA1419051-E6. This transceiver has been discontinued and is no longer available for purchase. Avaya recommends AA1419057-E6 as a replacement.
  • Page 30 The following table describes the 1000BASE-ZX CWDM SFP transceiver. This SFP transceiver operates at 1550 nm and has a reach of up to 70 km. The part number is AA1419052-E6. This transceiver has been discontinued and is no longer available for purchase. Avaya recommends AA1419065-E6 as a replacement.
  • Page 31 One model transmits at 1310 nm and receives at 1490 nm, while the mating model transmits at 1490 nm and receives at 1310 nm. You can only connect a mating pair. July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series Comments on this document? infodev@avaya.com...
  • Page 32 11.0 dB Maximum transmitter and dispersion power penalty 3.3 dB Transmitter characteristics Maximum launch power –3.0 dBm Minimum launch power –9.0 dBm Table continues… Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015 Comments on this document? infodev@avaya.com...
  • Page 33 To attain the BER of 10 , the minimum attenuation between the transmit and receive ports is 15 dB. July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series Comments on this document? infodev@avaya.com...
  • Page 34 Table 17: 1000BASE-ZX CWDM SFP DDI (70 km) specifications Parameter Specifications Maximum electrical power consumption 1.0 W Connectors Duplex LC Cabling SMF, 9 µm Data rate 1.0 Gbps Table continues… Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015 Comments on this document? infodev@avaya.com...
  • Page 35 Minimum attenuation between transmit and receive 8 dB ports Transmitter characteristics Launch power 0 to 5.0 dBm Receiver characteristics Receiver sensitivity –24 dBm Maximum receiver power –3.0 dBm July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series Comments on this document? infodev@avaya.com...

  • Page 36: Chapter 5: Sfp

    SFP+ transceivers support 10-gigabit per second (Gbps) connections. SFP+ modules do not interoperate with SFP modules. Important: Avaya recommends that you only use Avaya qualified transceivers. If you use other vendor transceivers, Avaya does not support them. Selecting an SFP+ Use an SFP+ transceiver to interface a port to a fiber optic cable.

  • Page 37: Installing An Sfp

    Job aid SFP+ transceivers are hot-swappable input and output enhancement components that allow 10- gigabit connections. All Avaya SFP+ transceivers use LC connectors to provide precision keying and low interface losses. The following table lists and describes the Avaya SFP+ models.
  • Page 38 Apply a light pressure to the SFP+ transceiver until the device clicks and locks into position in the module. 4. Remove the dust cover from the SFP+ optical bores, and insert the fiber optic cable. Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015 Comments on this document? infodev@avaya.com...

  • Page 39: Removing An Sfp

    Removing an SFP+ Remove an SFP+ transceiver to replace it or to commission it elsewhere. Before you begin • Wear an antistatic wrist strap. July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series Comments on this document? infodev@avaya.com...

  • Page 40: Sfp+ Specifications

    IEEE 802.3 document. All Avaya SFP+ transceivers meet or exceed these standards. SFP+ labels The typical Avaya SFP+ transceiver has a label on the top and bottom or side of the transceiver. The following figures show example labels. Avaya does use alternate labels, depending on the size of the device and space available for label information.

  • Page 41: General Sfp+ Specifications

    The following section provides specifications for the supported SFP+ transceivers. 10GBASE-SR/SW SFP+ specifications The 10GBASE-SR/SW SFP+ transceivers provides 10 GbE service at 850 nm. July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series Comments on this document? infodev@avaya.com...
  • Page 42 Receiver damage threshold 0 dBm Maximum receiver sensitivity in OMA –11.1 dBm Maximum receiver reflectance –12 dB Stressed receiver sensitivity in OMA –7.5 dBm Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015 Comments on this document? infodev@avaya.com...
  • Page 43 The following table (from IEEE 802.3–2012) describes the maximum channel insertion loss. The channel insertion loss includes both attenuation and connector loss (1.5 dB); therefore the maximum fiber attenuation is 0.2 to 0.4 dB. July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series Comments on this document? infodev@avaya.com...
  • Page 44 The following table lists the transmitter and receiver specifications for the 10GBASE-LR/LW SFP+ transceiver. The part number of this SFP+ transceiver is AA1403011-E6. Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015 Comments on this document? infodev@avaya.com...
  • Page 45 The part number of this SFP+ transceiver is AA1403013-E6. Table 23: IEEE 802.3ae 10GBASE-ER/EW SFP+ transceiver specifications Parameter Specifications Line rate (nominal) 10GBASE-ER/EW 10.3125 Gb/s ±100 ppm (10 GbE) Table continues… July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series Comments on this document? infodev@avaya.com...
  • Page 46 For more information about the 10GBASE-CX, including test and measurement information and more specifications, see the IEEE 802.3–2012 standard. The following table identifies the part numbers for specific cable lengths. Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015 Comments on this document? infodev@avaya.com...
  • Page 47 Maximum receiver sensitivity (average power) –24 dBm Maximum receiver (average) power, BER 10 –7.0 dBm Receiver damage threshold (average power) +5.0 dBm Receiver reflectance (maximum) –27 dB July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series Comments on this document? infodev@avaya.com...
  • Page 48 SFP+ * Achievable link distance is primarily dependent on cable plant insertion loss. 70 km is not possible in some situations. Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015 Comments on this document? infodev@avaya.com...

  • Page 49: Chapter 6: Translations Of Safety Messages

    Este es un producto clase A. El uso de este equipo en áreas residenciales puede causar interferencias nocivas, en cuyo caso, se requerirá que los usuarios tomen cualquier medida necesaria para corregir la interferencia por cuenta propia. July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series Comments on this document? infodev@avaya.com...

  • Page 50: Electrostatic Discharge Caution Statement

    électronique, à moins de mettre à votre poignet une bande de mise à la masse ou autre dispositif dissipant l'électricité statique. Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015 Comments on this document? infodev@avaya.com...

  • Page 51: Laser Eye Safety Danger Statement

    Glasfaserleiter oder Verbindungsanschluss. Gehen Sie immer davon aus, dass Glasfaserkabel mit einer Lichtquelle verbunden sind. Danger: PELIGRO Riesgo de lesión en los ojos por láser July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series Comments on this document? infodev@avaya.com...

  • Page 52: Laser Eye Safety Connector Inspection Danger Statement

    Verletzungsrisiko der Augen Achten Sie bei der Kontrolle der Anschlüsse darauf, dass die Lichtquellen abgeschaltet sind. Die für die Glasfaserkabel verwendeten Lichtquellen können Augenschäden hervorrufen. Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015 Comments on this document? infodev@avaya.com...

  • Page 53: Connector Cleaning Safety Danger Statement

    à air comprimé. Pour éviter tout risque d'irritation oculaire, portez des lunettes de protection lorsque vous utilisez de l'alcool à 90°. July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series Comments on this document? infodev@avaya.com...
  • Page 54 Per evitare irritazioni oculari da contatto, indossare gli occhiali di sicurezza quando si lavora con alcool isopropilico. Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015 Comments on this document? infodev@avaya.com...

  • Page 55: Optical Fiber Damage Warning Statement

    Non schiacciare o piegare il cavo a fibre ottiche. Se il cavo a fibre ottiche è posizionato in un vassoio o condotto con cavi elettrici pesanti e di grosse dimensioni, esso potrebbe essere danneggiato dal peso dei cavi elettrici. July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series Comments on this document? infodev@avaya.com...

  • Page 56: Optical Fiber Connector Damage Warning Statement

    Riesgo de daños en los equipos Limpie los equipos de fibra óptica únicamente cuando existan rastros de contaminación para evitar diseminarla aun más. Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015 Comments on this document? infodev@avaya.com...

  • Page 57: Sfp Damage Warning Statement

    SFPs are keyed to prevent incorrect insertion. If the SFP resists pressure, do not force it; turn it over, and reinsert it. Warning: AVERTISSEMENT Risques d'endommagement de l'équipement July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series Comments on this document? infodev@avaya.com...
  • Page 58 Rischio di danni all'apparecchio Gli SFP dispongono di chiavi in modo da evitarne l'inserimento errato. Se l'SFP resiste alla pressione, non forzarlo ma capovolgerlo e reinserirlo. Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015 Comments on this document? infodev@avaya.com...

  • Page 59: Glossary

    A semiconductor diode that emits light when a current passes through it. (LED) media A substance that transmits data between ports; usually fiber optic cables or category 5 unshielded twisted pair (UTP) copper wires. July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series Comments on this document? infodev@avaya.com...
  • Page 60 Small Form Factor A hot-swappable input and output enhancement component used with Pluggable (SFP) Avaya products to allow gigabit Ethernet ports to link with other gigabit Ethernet ports over various media types. Small Form Factor SFP+ transceivers are similar to SFPs in physical appearance but SFP+ Pluggable plus (SFP transceivers provide Ethernet at 10 gigabits per second (Gbps).

Table of Contents