Example
The following figure provides a sample of the output of the clock summer-time recurring
command.
3526T(config)#clock summer-time recurring 1 tues Jun 12:01 3 sat Sep 23:57 1
Summer time recurring is set to:
start: 1st week of June on Tuesday at 12:01
end: 3rd week of September on Saturday at 23:57
Offset: 60 minutes.
3526T(config)#
Variable definitions
The following table describes the parameters for the summer-time recurring command.
<1–5>
<DAY>
<MONTH>
<hh:mm>
<1–1440>
Displaying the local time zone settings
Display the settings for the local time zone.
Getting Started
clock summer-time recurring <1–5> <DAY> <MONTH> hh:mm> <1–5>
<DAY> <MONTH> <hh:mm> <1–1440>
Variable
Value
Specifies the week of the month. The first
occurrence specifies when the recurring
starts, and the second specifies when the
recurring stops.
Specifies the day of the week as the first 3
letters of the name. The first occurrence
specifies when the recurring starts, and the
second specifies when the recurring stops.
Specifies the Month using the first 3 letters of
the name. The first occurrence specifies
when the recurring starts, and the second
specifies when the recurring stops.
Specifies the time in hours and minutes in
military format (24–hr). The first occurrence
specifies when the recurring starts, and the
second specifies when the recurring stops.
Specifies the number of minutes to add or
subtract during summer-time recurring.
Setting local time zone
March 2013
61