Chapter 8: Configuring a TFTP server
Setting TFTP parameters
You can display the IP address of the TFTP server and assign an IP address to the TFTP
server.
For procedures to copy a configuration file to the TFTP server, or copy a configuration file from
the TFTP server to the switch to use to configure the switch, refer to Avaya Ethernet Routing
Switch 3500 Series — Fundamentals, NN47203–102.
Displaying the default TFTP server
Display the IP address of the server used for all TFTP-related transfers.
Before you begin
Procedure
1. Log on to ACLI in Privileged EXEC command mode.
2. At the command prompt, enter the following command:
Example
The following figure provides a sample output of the show tftp-server command.
3524GT-PWR+>enable
3524GT+#show tftp-server
TFTP Server IP address: 172.16.3.2
Assigning or clearing the TFTP address
Assign or clear the address for the switch to use for TFTP services.
Getting Started
show tftp-server
March 2013
65