Configuring Telnet Access - Avaya 3500 series Getting Started

Configuring Telnet
2 255.255.255.255
3 255.255.255.255
4 255.255.255.255
5 255.255.255.255
6 255.255.255.255
7 255.255.255.255
8 255.255.255.255
9 255.255.255.255
10 255.255.255.255
11 255.255.255.255
12 255.255.255.255
13 255.255.255.255
14 255.255.255.255
----More

Configuring Telnet access

Configure the Telnet connection that is used to manage the switch.
Procedure
1. Log on to ACLI Global Configuration mode.
2. At the command prompt, enter the following command:
Variable definitions
The following table describes the parameters for the telnet-access command.
enable | disable
logon-timeout <1–10>
retry <1–100>
36 Getting Started
(q=Quit, space/return=Continue)----
[no] [default] telnet-access [enable|disable] [logon-timeout
<1–10>] [retry <1–100>] [inactive-timeout <0–60>] [logging
{none|access|failures|all}] [source-ip <1–10> <A.B.C.D>[mask
<A.B.C.D>]]
Variable
Comments? infodev@avaya.com
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
Enables or disables Telnet connections
Specifies the time in minutes that you want
to wait between an initial Telnet connection
and acceptance of a password, before
closing the Telnet connection; enter an
integer between 1 and 10.
Specifies the number of times that the user
can enter an incorrect password before
closing the connection; enter an integer
between 1 and 100.
Value
March 2013