Disposing Of Waste Ink; Preparing And Replacement Timing - Epson SureColor SC-F9330 Series User Manual

SC-F9300 Series User's Guide
C
In one-second intervals, move the stirring stick
up and down. Repeat about 15 times.
When moving the stirring stick up and down,
touch the ink inlet cap to the ink tank and raise it
until you can see the hook on the stirring stick
completely.
c
Important:
Move the stirring stick slowly. If you move it
too quickly, ink may splatter.
D
Put the ink inlet cap back on the ink tank.
c
Important:
Press the ink inlet cap down firmly so that it
does not detach. If the slider comes into contact
with the ink inlet cap when pulling it out, the
cap could be damaged.
Maintenance
E
Close the ink inlet cover.

Disposing of Waste Ink

Preparing and Replacement
Timing
When Prepare empty waste ink bottle. is displayed,
Prepare a new Waste Ink Bottle as soon as possible.
When you want to replace the Waste Ink Bottle at this
stage due to night operations and so on, select Replace
Ink Bottle from the setup menu, and then replace the
bottle. If you perform the replacement without selecting
Replace Ink Bottle, the waste ink counter will not
operate correctly.
Maintenance menu U
page 104
Waste Ink Counter U
page 74
c
Important:
Never remove the Waste Ink Bottle while printing
or while the heads are being cleaned, unless there
are on-screen instructions. Failure to observe this
precaution could cause ink to leak.
73
"The Maintenance Menu" on
"Waste Ink Counter" on