Cleaning Wiper - Epson Stylus Pro GS6000 Maintenance Manual

EPSON Stylus Pro GS6000 Revision A
6.4.1 Cleaning Wiper
CAUTION
I
•
When cleaning the Cleaning Wiper, the PRINT HEAD cap must be
removed and cleaning must be complete before the head dries. We
recommend finishing the cleaning within 15 minutes to prevent the
head from drying.
1. Turn on the printer.
2.
Press the Ill> button to enter the Menu
mode.
3. Press the
,A
I T button to display ·'MAINTENANCE", and then press the
I>
button.
4. Press the £.IT button to display "CARRIAGE MAINTENANCE'', and then
press the Ill> button.
5. Press the [Enter] button to start Carriage Maintenance.
The PRINT HEAD moves to the left, and the Cleaning Wiper moves forward .
--OPEN MAINTCOVERS" is displayed on the LCD panel.
6. Open the MAINTENANCE COVER ASSY (right).
Figure 6-9. Opening the Maintenance cover (right)
CAUTION
I
•
•
j .
Do not touch the Cleaning Wiper and head cap unit with bare
fingers. Head cleaning may not be performed correctly because
of oil from your hands.
Do not leave a used Cleaning Stick on the printer's cover to
avoid stains .
7. Prepare the Cleaning Stick and the Ink Cleaner to remove the ink and dust on the
Cleaning Wiper.
8. Put on the plastic gloves and pour about l 0 ml of Ink Cleaner into the plastic cup.
Then, dip the Cleaning Stick into the Ink Cleaner taking care not to drop it from
the stick.
Figure 6-10. Preparation for Cleaning
MAINTENANCE Cleaning 226
Conftdenttaf