Table of Contents
Advertisement
SC-F9300 Series
User's Guide
See the "Specifications Table" for the external
dimensions of the printer.
"Specifications Table" on page 131
U
Notes when using the printer
Note the following points when using this printer to
avoid breakdowns, malfunctions, and print quality
decline.
❏ When using the printer, observe the operating
temperature and humidity range described in the
"Specifications Table". U
on page 131
Note, however, that the desired results may not be
achieved if the temperature and humidity are
within the limits for the printer but not within those
for the media. Be sure the operating conditions suit
the media. For more information, see the
documentation supplied with the media.
Also, when operating in dry areas, air conditioned
environment, or under direct sunlight, maintain
the appropriate humidity.
❏ Avoid using the printer in locations with heat
sources or that are exposed to direct draughts from
ventilators or air conditioners. The print head
nozzles could dry out and clog.
❏ When using a commercially available heater, we
recommend using it within the recommended
operating temperature range.
Using it outside of the recommended range may
cause the print quality to decline or the nozzles of
the print heads to become clogged.
"Specifications Table" on page 131
U
❏ Do not bend or tug the waste ink tube. Ink could
spill inside or around the printer.
Introduction
"Specifications Table"
18
❏ Maintenance such as cleaning and replacement
must be performed according to usage frequency or
at recommended intervals. Failure to perform
regular maintenance could result in loss of print
quality. In the absence of the appropriate
maintenance, continued use could damage the
print head.
"Cleaning Locations and Cleaning Timing" on
U
page 55
❏ The print head may not be capped (the print head
may not return to the right side) if the printer is
turned off when the media is jammed or an error
has occurred. Capping is a function for
automatically covering the print head with a cap
(lid) to prevent the print head from drying out. In
this case, turn on the power and wait a while until
capping is performed automatically.
❏ When the power is on, do not remove the power
plug or cut the power at the breaker. The print head
may not be capped properly. In this case, turn on the
power and wait a while until capping is performed
automatically.
❏ The print head is automatically cleaned at a fixed
interval after printing to keep the nozzle from
clogging.
Be sure that the Waste Ink Bottle is placed whenever
the printer is on.
❏ As well as being expended during printing, ink is
used during head cleaning and other maintenance
required to keep the print head in working order.
❏ To ensure the colors you want to print, maintain a
constant room temperature of 15 to 25˚C.
Notes when not using the printer
If you are not using it, note the following points when
storing the printer. If it is not stored correctly, you may
not be able to print properly the next time it is used.
❏ Turn the power on once every 7 days when the
printer is not used for a long time.
If you do not print for a long time, the print head
nozzles may become clogged. Head cleaning will be
performed automatically after the printer is turned
on and started. Head cleaning prevents clogged
print heads and maintains print quality. Do not
turn the printer off until cleaning is complete.
Advertisement
Table of Contents
