Ricoh D146 Service Manual page 1833

Code
5-20 Storage impossible because
of a lack of memory
5-21 Memory overflow
5-23 Print data error when printing
a substitute rx or confidential
rx message
5-25 SAF file access error
6-00 G3 ECM - T1 time out during
reception of facsimile data
6-01 G3 ECM - no V.21 signal was
received
6-02 G3 ECM - EOR was received
6-04 G3 ECM - RTC not detected
6-05 G3 ECM - facsimile data
frame not received within 18 s
of CFR, but there was no line
fail
6-06 G3 ECM - coding/decoding
error
6-08 G3 ECM - PIP/PIN received in
reply to PPS.NULL
SM
Meaning Suggested Cause/Action

Temporary memory shortage.

Test the SAF memory.

Test the SAF memory.

Ask the other end to resend the message.

Replace an SD card or HDD.

Replace the FCU.

Try adjusting the rx cable equalizer.

Replace the FCU.

Check the line connection.

Check for a bad line or defective remote
terminal.

Replace the FCU.

Check the line connection.

Check for a bad line or defective remote
terminal.

Replace the FCU.

Try adjusting the rx cable equalizer
Cross reference

Rx cable equalizer - G3 Switch 07 (PSTN)

Defective FCU.

The other terminal may be defective.

The other end pressed Stop during
communication.

The other terminal may be defective.
57 D163