Settings For Saving Power; Power Saving Settings - Minolta Di250f Operator's Manual

20. Settings for Saving Power

Power Saving Settings

Power consumption can be reduced by automatically turning off the touch panel and suspending the
preheating of the printer when the machine is not used for communications or copying for a certain
period of time.
NOTE
If copying or facsimile function is performed during power saving mode, it takes around 1 minute to
print since the machine requires a certain period of time for warming up the printer.
• Auto-reset
• Pre-heat
• Heater OFF
• LCD Backlight OFF
Saving Power
Power Save
Touch
1
Management screen.
"Accessing the Administrator Management
Screen" p. 9-2
: If there is no operation for a certain length of time while registering, setting,
or selecting the destination, the screen automatically returns to the initial
screen. This length of time before automatically returning to the initial
screen should be set. The factory setting is '1 minute'.
: Sets the length of time before it automatically switches to power saving
mode when there is no operation for that certain length of time. The factory
setting is '15 minutes'.
: If there is no operation for a certain length of time, it automatically turns off
the heater for the printer. The length of time before automatically turning off
the heater should be set. The factory setting is '30 minutes'. The amount of
power saved is greater than with the pre-heating function off, but it takes
longer to print out.
: If there is no operation for a certain length of time, the copier automatically
turns off the Touch Panel. The length of time before automatically turning
off the Touch Panel should be set. The factory setting is '1 minute'. If the
Touch Panel is unlit, it can be lit by touching it or the 10-key pad.
on the Administrator
1171P282EA
Setting the power saving function.
2
<Setting for the Auto-reset Function>
Auto-reset
• Touch
• Set the length of time before Auto-reset is
activated, and touch
9-37
.
1171P283EA
Enter
.
1171P284EA