Minolta Di250f Operator's Manual page 287

Replacing the Imaging Unit
Pull the lever and open the side cover.
1
Pull out the Imaging Unit by grasping the
2
green levers and pushing against the main
unit strongly with the thumbs.
Grasp the handle with one hand, and take the
3
old Imaging Unit out of the machine.
Remove the seal, magnets, tape, polyester
4
films, and sponge from the new Imaging
Unit.
Tape
Polyester film
Magnets
Polyester film
2$$
2$$
2$$
Seal
Sponge
2$$
2. Replacing the Imaging Unit and Toner Bottle
Shake the new Imaging Unit 4-5 times
5
horizontally.
Set the new Imaging Unit on the rails in the
6
machine and push it firmly into place.
NOTE
Push the Imaging Unit all the way into the
machine until a click is heard.
Close the side cover.
7
13-9
2 $$
2$$
2$$