Setting The Time To Save Documents That Could Not Be Sent; Memory Holding Timer - Minolta Di250f Operator's Manual

13. Setting the Time to Save Documents that could not be Sent

Memory Holding Timer

Documents that could not be sent due to the line to the destination being busy, etc. can be saved in the
memory for a certain period of time. This section describes instructions on setting the duration to hold
such documents in the memory.
Useful Tip
The factory setting is one hour to hold the image data of a document that is not transmitted.
Settings
Initial Setting
1 Touch
Management screen.
"Accessing the Administrator Management
Screen" p. 9-2
Manage
Select , and touch
2
Incomplete TX Hold
on the Administrator
1171P186EA
.
1171P211EA
3 Touch or
Enter
touch .
Useful Tip
Times from 10 minutes to 72 hours can be set as
the memory holding time. (10, 20, 30, 40, or 50
minutes, and 1, 2, 4, 8, 12, 24, or 72 hours)
Every time is touched, the memory
holding time is shortened.
Every time is touched, the memory
holding time is extended.
Not Held
When is touched, any document
that could not be sent is immediately deleted.
Cancel
When is touched, it returns to the
previous screen.
Confirm the setting details when the screen
4
returns to the same one as in step 2. Touch
Enter
if they are correct.
Useful Tip
Incomplete TX Hold
To modify, touch
change the setting.
Enter
5
Touch repeatedly until the screen
initial screen.
returns to the
9-17
to set the time, and
1171P212EA
to