Minolta Di250f Operator's Manual page 218

9-28
16. Setting the Reception Mode
<Setting for the Reduction Ratio when
Handling Long Documents>
LongDoc
• Select
• Use the 10-key Pad or touch
to enter the reduction ratio, and touch
Enter .
NOTE
This setting is only effective when
is selected in the "Setting for Handling the
Long Documents" on p. 9-27.
Useful Tip
If 'Reduction' is selected in the "Setting for
Handling the Long Documents", the document
is reduced in size when printed in accordance
with the length of the paper if the received
document is longer than the paper. The
maximum reduction ratio should be set in this
case. If the document is still longer than the
paper when reduced by the maximum reduction
ratio, it is divided when printed instead of being
reduced.
<Setting for the Length to be Cut Off when
Handling Long Documents>
LongDoc
• Select
Cut Off Length
• Use the 10-key Pad or touch
to enter the length to be cut off, and touch
Enter
.
Reduction
, and touch .
and
1171P250EA
Reduction
, and touch
.
and
1171P251EA
NOTE
This setting is only effective when
selected in the "Setting for Handling the Long
Documents" on p. 9-27.
Useful Tip
If 'Cut Off' is selected in the "Setting for
Handling the Long Documents", the document
is cut off and printed when receiving a
document longer than the paper. The maximum
length to be cut off should be set in this case. If
the received document would still be longer
than the paper even if the maximum length were
cut off, it is divided when printed instead of
being rounded off.
3 Confirm the setting details when the screen
returns to the same one as in step 2. Touch
Enter
if they are correct.
Useful Tip
Touch the key for the items to be modified to
change the setting.
Enter
4 Touch repeatedly until the screen
returns to the initial screen.
Cut Off is