Minolta Di250f Operator's Manual page 79

Calling the destination and transmitting the document
• Using the Automatic Document Feeder:
When this machine is not transmitting or receiving any documents other than yours, it starts to call the
destination as soon as the first page of the document has been scanned, and begins transmission. If this
machine is transmitting or receiving another document, it scans all of your documents, and only calls
the recipient's number after the preceding transmission or reception has finished, to transmit your
document.
• Using the Book Scanner:
Press the Start key after scanning all the pages of the document. This machine will start to call the
destination's number and transmit your document.
• Up to 64 documents can be stored in the memory. If 64 documents have already been stored or the
memory is full, no more documents can stored.
How to select the communications mode (Only for products supporting the G3 Multi-Port model.)
• Select a communication mode as follows. When a key is highlighted, the mode is enabled.
G3-1 When sending to a G3 facsimile using a telephone line via Port 1.
G3-2 When sending to a G3 facsimile using a telephone line via Port 2.
• Communications mode returns to the original setting after each transmission. "Setting for
Transmission" p. 9-22
To Confirm the Destination
• While transmitting a document or a line is busy, you can confirm whether the destination's number is
correct. "Confirming the Settings"
When the Memory is full
• When a large number of documents are stored in the memory (when the occupied volume of the
memory is nearly 100%), transmission may become impossible. In this case, wait until memory
becomes available.
• If a document could not be transmitted, the document is stored in the memory for retransmission.
It can be erased to free up memory. "Confirming the Settings"
1171P405EA
p.1-27
1. Sending a Document
1171P402EA
p.1-27
3-5