Minolta Di250f Operator's Manual page 299

Messages
This mode cannot be selected
with the Exclusive Paper mode.
Please remove all copies in the
non-sort tray.
Please remove the original in the
Document Feeder and place the
original in the SADF.
This application cannot be
changed now, select Interrupt
mode to change the application.
Return the following number of
originals to Document Feeder.
Cannot interrupt this job: not
enough free memory. Press Start
to resume.
Cannot interrupt this job: not
enough free memory.
Original's size cannot be
detected. Reselect the paper size.
Original's size cannot be
detected. Select Zoom.
Original's size cannot be
detected. Select Original size.
Original's size can't be detected.
Reposition the original or cancel
following modes.
1. If the Following Icons and Alarm Messages Are Displayed
Causes
Stapling or 2-Sided copying is
selected after a drawer with thick
paper or OHP sheets is selected.
The document tray cannot be
selected as paper remains in the
non-sort tray.
The document is set on the Single
Feed Tray while documents
remain in the Automatic
Document Feeder.
The Fax key is pressed while the
copying function is active.
Paper misfeed has occurred while
the Automatic Document Feeder
is being used for copying.
The Interrupt key is pressed
while copying, but interruption is
unavailable because the memory
capacity is insufficient.
The Interrupt key is pressed, but
interruption unavailable because
the memory capacity is
insufficient.
The document size could not be
detected with the automatic paper
mode.
The document size could not be
detected with the automatic size
mode.
The document size could not be
detected.
The document size could not be
detected.
Countermeasures
•Cancel the stapling or 2-Sided
copying function. p. 4-4, 4-16
•Reselect the paper. "Selecting
the Copy Paper Size for
Copying" p. 2-5
Remove all paper from the non-
sort tray.
Place the document in the Single
Feed Tray after removing the
document from the Automatic
Document Feeder.
Press the Interrupt key to stop
copying, then press the Fax key.
Return indicated pages of the
document to the Automatic
Document Feeder.
Press the Start key to restart
copying operation prior to
interruption.
Please wait until sufficient
memory becomes available.
Select the paper size. "Selecting
the Paper Size for Copying"
p. 2-5
•Set the Zoom ratio. "Selecting
the Zoom Ratio for Copying"
p. 2-9
•Select a different size of paper.
"Selecting the Copy Paper Size
for Copying" p. 2-5
•Place the document again.
•Reselect the document size.
•Cancel the image repeating
function. p. 4-28
•Place the document again.
•Reselect the document size.
•Cancel the indicated functions.
14-5