Amending User Data - Minolta Di250f Operator's Manual

10-2

1. Amending User Data

The data and initial status of the machine as set by the administrator when user registration was carried
out can be modified in accordance with the usage status for each user.
NOTE
The administrator must be registered as a user in advance. "Registering Users"
• User Name:
Registers the name of the user (dept. or individuals).
• Access Number:
Registers passwords to restrict the users.
• User Number:
Registers a number for each user.
• User TSI:
The TSI information to be printed on the transmitted document can be registered by the user.
• F CODE:
Registers the F CODE to select the mailbox that can be used by each user. "F CODE"
• F CODE password:
Registers the password for the mailbox. "F CODE"
• Remote Input Check:
Sets whether or not a password is used to restrict reception of documents into mailboxes from other
facsimiles. The factory setting is 'Off'.
• Priority Screen:
Sets the initial screen. The factory setting is 'Auto-mode screen'.
• Priority Facsimile screen:
Sets the initial destination specification screen used by the facsimile function. The factory setting is
'One-touch screen'.
• Received documents:
Sets how to handle the document received in the mailbox. The factory setting is 'Save to Box'.
• Priority Image Quality:
Sets the initial image quality. The factory setting is 'Standard'.
• Priority Contrast:
Sets the initial density. The factory setting is 'Normal'.
• Communications Mode:
Sets the initial value for the communications mode. The factory setting is 'G3-1'.
• Initial Status of the Transmission Method:
Sets either Memory transmission or Real Time transmission as the initial setting. The factory setting
is 'Memory TX'.
• TSI:
Sets the TSI style to be printed on the transmitted document. The factory setting is 'On The Doc.'.
• TX Marker:
Sets the TX Marker for transmitted documents. The factory setting is 'OFF'.
• Transmission Report:
Sets the printing style for reports used to confirm the facsimile transmission results. The factory
setting is 'If TX Fail'.
• Document Image on Report:
Sets whether or not a copy of the transmitted document image is printed on the status report. The
factory setting is 'ON'.
(Only for products that support the G3 Multi-Port model.)
p. 5-27
p. 9-18
p. 5-27