Initial Screen; Auto-Mode Screen, Fax Screen, And Copy Screen; Auto-Mode Screen - Minolta Di250f Operator's Manual

1-14

4. Initial Screen

Auto-mode Screen, FAX Screen, and Copy Screen

The screen which is displayed when the equipment is ready to begin operations for copying, facsimile
transmission and reception, and registration / setting is called the initial screen. The initial screen can be
selected from three types to suit the way you normally use the equipment.
Useful Tips
• The initial screen can be selected from three types, namely, "Auto-mode screen", "FAX screen", and
"Copy screen", to suit the way you normally use the equipment. "Setting the Initial Screen to be
Displayed" p.9-8
• "Auto-mode screen" has been set at the factory.

Auto-mode Screen

This screen can be used for both facsimiles and copying without specifying which function is used.
• When the 10-key Pad is used to enter a figure of four digits or more, or a figure starting with '0', and
then the Start key is pressed, the equipment automatically determines it to be a facsimile number and
starts transmission. When a three-digit number or less (other than numbers starting with '0') is entered,
the equipment determines that to be the number of copies required and starts copying. (This describes
the Di350f. For the Di250f it is "3 or more" and "2 or less" respectively.)
• When the Copy key on the control panel is pressed, the copy menu screen is displayed. To select the
copy function, please press the Copy key.
• When the Fax key on the control panel is pressed, the facsimile menu screen is displayed. To select the
facsimile function, please press the Fax key.
• When the Auto-mode screen has been selected as the priority screen, pressing the Panel Reset key twice
on the copy or facsimile menu screens will return to the Auto-mode screen.
1171P001EB
Facsimile numbers registered for one-touch keys
1 to 4 and copy program 1 are displayed.