Setting The Monitor Speaker And The Buzzer Volume; Sound Volume - Minolta Di250f Operator's Manual

2. Setting the Monitor Speaker and the Buzzer Volume

Sound Volume

You can adjust the volume of the monitor sounds (ringer tone, calling tone, etc.) as well as that of the
buzzer (beeps, etc.).
Setting the Volume
Press the Utility key.
1
Maint.
Select and touch
2
Select the key for the sound to be adjusted.
3
Useful Tips
• Touch Buzzer Sound Volume
volume of the buzzer sound, such as a beep
heard when reception is complete.
Alarm Sound Volume
• Touch
alarm volume, which is heard whenever there
is a paper misfeed and so on.
• Touch Monitor Sound Volume
volume of the monitor speaker heard
when On-hook Dial
instance.
Sound Vol.
.
1171P181EA
1171P182EA
to set the
to set the
to set the
is touched, for
Touch Lower or
4
volume, and touch
0
Useful Tips
• Five volume levels can be set. The sound gets
louder the more boxes are shaded.
• Touch Sound OFF to turn off the sound.
Once the screen returns to the same as in step
5
3, confirm the registered details.
Touch Enter if they are correct.
Useful Tip
To modify the setting, touch the volume key that
you want to change, and reset it.
Enter
Touch repeatedly until the screen
6
returns to the initial screen.
8-3
Louder to select the
.
Enter
1171P183EA