Receiving A Document; Automatic Reception - Minolta Di250f Operator's Manual

3-20

10. Receiving a Document

Automatic Reception

If the copier is in Automatic Reception mode, documents will be received automatically without any
operation. This section explains the size of documents that can be received and what this system does if
the paper runs out.
Useful Tips
• There are basically two ways to receive a document - namely Automatic Reception and Manual
Reception. With Manual Reception, the document is only received after the handset is lifted to accept
the call. The factory setting is Automatic Reception.
For Automatic Reception, "Setting the Reception Mode"
For Manual Reception, "Receiving a Document after Talking on the Telephone"
• While receiving a document, the touch panel displays the receiving indicator.
• When reception is complete, the machine beeps.
"Confirming the Communication Status"
• When the paper runs out, the touch panel displays an alarm to indicate the lack of paper and the "no
paper" red lamp on the Paper Drawer Lights.
(When the paper is running low, the light flashes red [Except for the Large Capacity Cabinet].)
• The received document is stored in the memory and is automatically printed once the appropriate
size paper is installed.
• If the memory becomes full during reception, the remaining portion of the document cannot be
received.
• Once the memory is full, no further documents can be received.
1166O358AA
p. 9-25
1171P056EA
p. 5-2
p. 6-2