Setting The Line Type - Minolta Di250f Operator's Manual

9-6

5. Setting the Line Type

There are two types of telephone lines – Touch-tone lines (PB) and Dial Phone lines (DP10, DP20).
Transmission is impossible unless the type of telephone line and the setting for this product are in
agreement. Set the Line Type to be used for the facsimile after confirming the telephone line type that is
currently used.
Useful Tip
'PB' has been set at the factory.
Setting
Initial Setting
Touch
1
Management screen.
"Accessing the Administrator Management
Screen" p. 9-2
Line
2 Select , and touch
Useful Tips
• When the optional G3 Multi-Port model is
used, two different general subscriber lines
can be used.
Line Type (1)
• Touch
set each line type.
on the Administrator
1171P186EA
Line Type
.
1171P193EA
Line Type (2)
or to
Select the key for the telephone line type
3
currently used, and touch
Useful Tips
• DP20:
Touch this when a 20pps-dial line is used.
• DP10:
Touch this when a 10pps-dial line is used.
• PB:
Touch this when a Touch-tone line is used.
Confirm the setting details when the screen
4
returns to the same one as in step 2. Touch
Enter
if they are correct.
Useful Tip
Line Type
To modify, touch
setting.
Enter
5 Touch repeatedly until the screen
returns to the initial screen.
Enter
.
1171P194EA
to change the